Monday, October 28, 2013

Thursday, September 5, 2013

433 MHz ASK RF Transmitter Receiver Module

New 433 MHz ASK RF Transmitter Receiver Module with HT12E+HT12D (4Bit Encoder+Decoder IC)200 Meters Long Range*
*200 Meters Long Range in STANDARD LINE OF  SIGHT  , Suitable for Wireless Remote  Robot Control etc.

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiZaEfOtxcw72g0u5HFp63mWsu9S_AX2rPzmU67QLh5anLA1YPNN1aKt7hQE1HeAZKOTJcb8bA45Uf0d5NUQYWOab0fTIIrcTk9Ut7YjzPF6AzljDkwQWPggmj16Ivoa3Yw7gyxOO1u9x0/s1600/433Mhz_RxTx_Module.jpg

Specification
  • Range in open space(Standard Conditions) : 200 Meters
  • RX Receiver Frequency : 433 MHz
  • RX Typical Sensitivity : 105 Dbm
  • RX Supply Current : 3.5 mA
  • RX IF Frequency : 1MHz
  • Low Power Consumption
  • Easy For Application
  • RX Operating Voltage : 5V
  • TX Frequency Range : 433.92 MHz
  • TX Supply Voltage : 3V ~ 6V
  • TX Out Put Power : 4 ~ 12 Dbm





Wednesday, September 4, 2013

PICKIT3 USB Programmer Debugger TPS-01307

TPS-01307   Microchip PICKIT3 USB Programmer/Debugger (USB Cable free)

Microchip PICKIT3 USB Programmer/Debugger (USB Cable free)

Product Description  PICkit 3 Features USB...

Microchip PICKIT3 USB Programmer/Debugger (USB Cable free)

PICkit 3 Features
  • USB (Full speed 12 Mbits/s interface to host PC)
  • Real-time execution
  • MPLAB IDE compatible 
  • Built-in over-voltage/short circuit monitor
  • Firmware upgradeable from PC/web download
  • Totally enclosed
  • Supports low voltage to 2.0 volts (2.0v to 6.0v range)
  • Diagnostic LEDs (power, busy, error)
  • Read/write program and data memory of microcontroller
  • Erase of program memory space with verification
  • Freeze-peripherals at breakpoint
  • Program up to 512K byte flash with the Programmer-to-Go
The MPLAB PICkit 3 allows debugging and programming of PIC® and dsPIC® Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer's PC using a full speed USB interface and can be connected to the target via an Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE).

Pakcage List:
1 PICKIT3 (oem)
1 USB cable
1 6pin cable
Download MPLAB IDE v8.70
Download  stand-alone programmer application for the PICkit 3 here

  • Part # : TPS-01307
TPS-01307   Microchip PICKIT3 USB Programmer/Debugger (USB Cable free)

Microchip PICKIT3 USB Programmer/Debugger (USB Cable free)

Product Description  PICkit 3 Features USB...

Tuesday, September 3, 2013

soldering iron bit tip cleaner

  Soldering Iron Bit Tip Cleaner

TPS-01365 Soldering Iron Bit Tip Cleaner

Soldering Iron Bit Tip Cleaner

Soldering Iron Bit Tip Cleaner







TPS-01365Soldering Iron Bit Tip Cleaner

Soldering Iron Bit Tip Cleaner

Soldering Iron Bit Tip Cleaner

Friday, August 30, 2013

IR LED Photodiode Sensors Array for LFR Robot Part # : TPS-00628

TPS-00628 6 Digital IR - Photodiode Sensors Array for LFR Robot

6 Digital IR - Photodiode Sensors Array for LFR Robot

6 IR-Photodiode Sensors Array- for Line following...


6 Digital IR - Photodiode Sensors Array for LFR Robot

6 IR-Photodiode Sensors Array- for Line following robot (LFR) and micro-mouse robot
 (Digital out, Independent Manual Adjustable)
  • Ideal for LFR (line-follower Robot)
  • obstacles avoiding robots
  • obstacles chasing robot
  • side wall sensor
  • maze solving robots
Special : Output Indicator LED for each Sensor
             It Gives “HIGH” on detecting White/Light color surface
             If you turn Pot (Blue&White color) in Anti-Clockwise:Sensitivity will Increase

Pin-Out

Pin No 1= Sensor-1 Signal Out
Pin No 2= Sensor-2 Signal Out

Pin No 3= Sensor-3 Signal Out
Pin No 4= Sensor-4 Signal Out

Pin No 5= Sensor-5 Signal Out
Pin No 6= Sensor-6 Signal Out

Pin No 7= Not Connected
Pin No 8= Not Connected

Pin No 9= Ground (-)
Pin No 10= +5V Vcc
  • Part # : TPS-00628
  













TPS-006286 Digital IR - Photodiode Sensors Array for LFR Robot

6 Digital IR - Photodiode Sensors Array for LFR Robot

6 IR-Photodiode Sensors Array- for Line following...

Friday, August 23, 2013

40000 RPM 12V DC Motor / 27000 RPM 6V DC Motor PMDC

40,000 RPM 12V DC Motor / 27,000 RPM 6V DC Motor (PMDC)

Ideal for Hovercraft , DIY Homemade PCB Drill Machine


 

TPS-01364 40000 RPM 12V DC/PMDC Motor

40000 RPM 12V DC/PMDC Motor

Specification: Electrical Data (at No Load...





Specification:
Electrical Data (at No Load Conditions):
Bi-Directional DC Motor (PMDC)
  • 40,000 RPM at 12V DC (No Load Conditions) Minmum Current 1.85Amp (1850 mA)
  • 27,000 RPM at 6V DC (No Load Conditions) Minmum Current 0.95Amp (950 mA)
  • These are high RPM, high torque and current motor. There is NO built in fan. We suggest using with a heat-sink or fan for extended long use.

Mechanical Data:

  • Shaft Dia              : 2.3mm (Aprox.)
  • Shaft Length         : 12mm (Aprox.)
  • Total length           : 38mm (Aprox.) Without Shaft
  • Motor Dia            : 27mm (Aprox.) 
  • Mounting Screw Distance : 16mm (Aprox.) 
  • Weight: 50gms (Aprox.) 











Sunday, August 18, 2013